1. Glass Type: eg. 6mm clear toughened or 6mm clear float
   
   
2. Size: eg. 600mm x 1200mm
   
   
3. Processing Requirements: see drawing examples opposite (fig. 1)

• Holes, cut outs and notches clearly mark measurements from edge of glass to centre.
  
• Specify edgework required.
  
• With mitred edges please show front or back mitre, as per diagram (fig.2). Examples of mitred edges can be seen here (Edgework)
  
• Accompany the order with hardware cut out details from the manufacturer.
  
• Mark square corners if the panel is out of square.
  
• Toughened stamp will be placed in the bottom left hand corner, please note if you require a different position or no stamp with a removable label.
  
  
  
  AS/NZS2080 AUTOMOTIVE
  
  
  
  AS/NZS2208 ARCHITECTURAL
  
  
• Show which face is drawn when ordering patterned or reflective glass, if the panel is out of square or has cutouts etc.
  
• Show direction of pattern for directional glass.
  
• Processing glass from templates. Please ensure all processing details (fig.3) are clearly marked on template (See Template page for downloadable templates), along with your company name and order number together with a written purchase order. We do not accept any paper or cardboard templates. Orders cut from templates will be charged a handling fee plus a complex shape.

fig.1 Processing example drawing

fig.3 Measurement example drawing